PDA

View Full Version : Rear disks on a furio, SX etc.



Cozzi
01-12-2008, 12:01 PM
As above, has anybody converted the rear drums on the lower model C2's to disks?
or does anybody know how easy it can be done or if there is any complications.

I would like to do it but not if its going to mess up the ABS or EBD.
Any info would be much apriceiated, e.g. whats needed, costs, anything.

Thanks all in advance.
Steven.

makao7
01-12-2008, 12:07 PM
i will be defo b interested 2 c if this can be done ive got the same car as you and trying to do as much to it as possible there is alot to come out of these cars u no!!

JonnyW
01-12-2008, 02:11 PM
You might be able to take the rear ones from the VTR/VTS/GT etc and put them on yours.

But i'd imagine you need the Brake Servo aswell because it's having to work for two extra calipers.

Cozzi
01-12-2008, 04:30 PM
Anyone have any more information?

Madmike46
04-12-2008, 09:57 PM
Basically most of this stuff. This is off a GT/VTR/VTS

http://i8.photobucket.com/albums/a5/mmatthews/GTRearCalipers.jpg

c2v12
04-12-2008, 10:21 PM
just get a complete rear beam from a breakers yard and swap the full beam over saves messing on swapping loads of parts. your brake master cylinder / servo will be fine as its the same threw out the c2 range,
i paid 50 for a complete rear beam from e-bay. make sure you get handbrake cables too
Gaz