+ Reply to Thread
Results 1 to 14 of 14

Thread: top mount replacement

Hybrid View

  1. #1
    Full Member carlloeb27 is on a distinguished road
    Join Date
    Aug 2017
    Location
    manchester
    C2 Model
    c2 loeb 027 red
    Posts
    84

    Default top mount replacement

    does anyone know the correct oem numbers for the top mounts the rpo number is 10993.cheers

  2. #2

  3. #3
    Full Member carlloeb27 is on a distinguished road
    Join Date
    Aug 2017
    Location
    manchester
    C2 Model
    c2 loeb 027 red
    Posts
    84

    Default

    Cheers trek after lots of viewing at other threads I’ve worked out that I need the later mounts

  4. #4
    Full Member carlloeb27 is on a distinguished road
    Join Date
    Aug 2017
    Location
    manchester
    C2 Model
    c2 loeb 027 red
    Posts
    84

    Default

    So would I need 5038 f5 as I believe there are different variants also why are the pin offsets different from drivers to passenger

  5. #5
    C2 Addict Advanced Poster ozVTR is on a distinguished road ozVTR's Avatar
    Join Date
    Jan 2005
    Location
    Brisbane, Australia
    Posts
    1,000

    Default

    As Trek says in his post there are two variants, before RPO 10156 and after RPO 10156.
    The left and right mounts for EITHER variant are the same.
    It's just that the post RPO 10156 mounts don't look "symmetrical" when installed in the car.

  6. #6
    Full Member carlloeb27 is on a distinguished road
    Join Date
    Aug 2017
    Location
    manchester
    C2 Model
    c2 loeb 027 red
    Posts
    84

    Default

    Yeah I get it now so upto rpo 10156 is the earlier type and after rpo 10156 or 10157 is the later type

  7. #7

    Default

    Quote Originally Posted by carlloeb27 View Post
    Yeah I get it now so upto rpo 10156 is the earlier type and after rpo 10156 or 10157 is the later type
    Correct���� Easy way to tell , open the bonnet and look at the top mount location pins if the locating pin holes are roughly at 3 and 9 o clock when viewed from above then it’s the later type , if any where else then early type , use febi bilstien and get the pro kit as it includes everything

  8. #8

    Default

    Quote Originally Posted by Trek View Post
    Correct���� Easy way to tell , open the bonnet and look at the top mount location pins if the locating pin holes are roughly at 3 and 9 o clock when viewed from above then it’s the early type , if any where else then later type , use febi bilstien and get the pro kit as it includes everything
    As above

  9. #9
    Full Member carlloeb27 is on a distinguished road
    Join Date
    Aug 2017
    Location
    manchester
    C2 Model
    c2 loeb 027 red
    Posts
    84

    Default

    Thanks trek for clearing that up yeah the holes are roughly around there give or take,I’m only replacing them as they are over ten years old and rubber is perishable so I will get the pro kit as advised debit ones,should I go on eBay for them or febi website

  10. #10

    Default

    Lol ok , can’t edit now as well , pain in the arsssssssse

  11. #11
    Full Member carlloeb27 is on a distinguished road
    Join Date
    Aug 2017
    Location
    manchester
    C2 Model
    c2 loeb 027 red
    Posts
    84

    Default

    Haha there not easy to find these pro kits

  12. #12

    Default

    Y
    Quote Originally Posted by carlloeb27 View Post
    Haha there not easy to find these pro kits
    Yes they are
    https://rover.ebay.com/rover/0/0/0?m...2F362051285649

  13. #13
    Full Member carlloeb27 is on a distinguished road
    Join Date
    Aug 2017
    Location
    manchester
    C2 Model
    c2 loeb 027 red
    Posts
    84

    Default

    Cheers trek your a star as always

+ Reply to Thread

Similar Threads

  1. Lower engine mount (gearbox mount) help needed please
    By Loeb106 in forum Advice, Queries & Technical Problems
    Replies: 5
    Last Post: 09-02-2017, 06:09 PM
  2. top mount
    By dizzypig in forum Advice, Queries & Technical Problems
    Replies: 3
    Last Post: 31-03-2016, 09:38 PM
  3. Top Mount
    By GazSykes90 in forum Modifications
    Replies: 0
    Last Post: 28-07-2013, 02:24 PM
  4. top mount help
    By jamie615 in forum Advice, Queries & Technical Problems
    Replies: 4
    Last Post: 20-04-2011, 06:38 PM
  5. BMC CDA Mount
    By randomcaller in forum Modifications
    Replies: 0
    Last Post: 28-04-2010, 08:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts