+ Reply to Thread
Results 1 to 14 of 14

Thread: No speedo odometer or power steering please help!!

  1. #1
    Lite Member stephanem10 is on a distinguished road
    Join Date
    Mar 2013
    Location
    Sunderland, NE
    C2 Model
    Furio 1.4
    Posts
    64

    Default No speedo odometer or power steering please help!!

    I have recently replaced the coil pack on my 04 furio and since then my speedo is constantly displaying at 0 and the odometer isnt changing and the steering is very heavy,
    has anyone else came across this problem and will it be an easy fix or does it need to go to the garage.

    Thanks in advance!

  2. #2

    Default

    is your ABS Light on

  3. #3

    Default

    Check all the fuses behind the glovebox and the underbonnet ones too
    Car is not getting any speed information , you could carry out a Bsi reset ( google it and follow it to the letter)

  4. #4
    Lite Member stephanem10 is on a distinguished road
    Join Date
    Mar 2013
    Location
    Sunderland, NE
    C2 Model
    Furio 1.4
    Posts
    64

    Default

    Thanks, will the bsi reset help the power steering?

  5. #5

    Default

    yes resets everything, but follow it to the letter or you will end up locked out in the worst case( which is why u put window down)

    BSI Reset procedure as this may cure your faults:
    Put the driver's window down, lift the bonnet and ensure all equipment is switched off.
    Ensure all doors are closed and remove key from the ignition.
    Wait for 3 minutes, disconnect the vehicle battery and wait 15 seconds.
    Reconnect the vehicle battery, wait a further 10 seconds (do not open doors.).
    Switch on the side lights through the driver's window.
    Switch on the ignition and check system's functionality.
    Hold lock button on key down for 10 seconds.
    Remove key open & close door test central locking system.
    Start the engine and complete the system's check.
    Failure to follow this procedure could result in incorrect operation of many BSI related items.

  6. #6
    Lite Member stephanem10 is on a distinguished road
    Join Date
    Mar 2013
    Location
    Sunderland, NE
    C2 Model
    Furio 1.4
    Posts
    64

    Default

    Hi, I have just done the BSI reset and nothing has changed and by the owners handbook i cant figure out which fuse i would have to change, any suggestions thanks!

  7. #7

    Default

    Just check them all , and as previously asked .... does your ABS light come on and go off... does the car beep at you
    Last edited by Trek; 02-07-2013 at 03:59 PM. Reason: Just check them all

  8. #8
    Lite Member stephanem10 is on a distinguished road
    Join Date
    Mar 2013
    Location
    Sunderland, NE
    C2 Model
    Furio 1.4
    Posts
    64

    Default

    Hi the abs light isn't on at all and the car beeps and an air ha light comes on thanks

  9. #9

    Default

    The main computer (BSI) has lost communication with the ABS unit ,possibly because it lost power or the relays stuck.....depends on car theres a little black relay right at the front of the ns inner wing bottom , disconnect that and reconnect it

  10. #10

    Default

    I have the same problem with a 2004 1.1 c2 I don’t have abs. I have no power steering and no speedo, the car beeps at me when starting but there are no codes and no lights on the clock. Can any of you guys help. I have also tried the bsi reset and no luck.

  11. #11

    Default abs

    are c2 has abs and also a speedo sensor,so i dont think the car gets it speed from the abs ecu.
    I know peugeot's do.

  12. #12
    C2 Addict Advanced Poster ozVTR is on a distinguished road ozVTR's Avatar
    Join Date
    Jan 2005
    Location
    Brisbane, Australia
    Posts
    995

    Default

    Quote Originally Posted by marrygold View Post
    are c2 has abs and also a speedo sensor,so i dont think the car gets it speed from the abs ecu.
    I know peugeot's do.
    If your car has ABS the speed is derived from that. If there is no ABS the speed is derived from a sensor on the gearbox just above the drive shafts.

  13. #13

    Default abs

    my c2 has abs and a speed sensor

  14. #14
    C2 Addict Advanced Poster ozVTR is on a distinguished road ozVTR's Avatar
    Join Date
    Jan 2005
    Location
    Brisbane, Australia
    Posts
    995

    Default

    The engine management unit will be using the 'speed sensor'. 'Speed' will be derived from the ABS.

+ Reply to Thread

Similar Threads

  1. Power steering
    By robbiet09 in forum C2 Chat
    Replies: 0
    Last Post: 12-05-2013, 01:16 PM
  2. citroen c2 no power steering abs or speedo
    By jocks206 in forum Advice, Queries & Technical Problems
    Replies: 4
    Last Post: 03-05-2013, 01:55 PM
  3. power steering
    By kerrgt in forum Advice, Queries & Technical Problems
    Replies: 2
    Last Post: 08-11-2012, 06:46 AM
  4. Power steering cut out.
    By Claretfan in forum Advice, Queries & Technical Problems
    Replies: 4
    Last Post: 27-04-2012, 08:23 AM
  5. speedo and odometer not working
    By calvts in forum Advice, Queries & Technical Problems
    Replies: 6
    Last Post: 15-11-2010, 09:22 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts