Still cant figure out how to wire sub???

[jenic]

I'm struggling to get my power cable through from the bonnet to the cabin.

I have read i either need to use the bonnet release grommet or the thing by the pedals.

Problem is i dont know where these come out, and since the engine bay is full i cant figure it out.

Any help appreciated.

Mike

[dublinvtr08]

hey mate the grommit is on the passeger side behind the dash just get someone to grab it as u push it thru and ur sorted

[jenic]

Thanks for the reply.

Its in the engine bay where i cant see the grommet to see where to push the wire through though?

[dublinvtr08]

go inside the car under the the dash at the passenger footwell ull see the grommet pull it out a bit push the wire thru and get some1 to look behind the filter box ull see it poppin thru there

[Den]

i find it easier to go from the footwell and push the wire into the engine bay through the grommit instead of trying to find it to push from engine bay into the footwell...... if you know what i mean

[dublinvtr08]

thats wot i did aswell den

[Den]

great minds.....

[jenic]

But, my inline fuse needs to be in the engine, so need to push wire from engine to cabin.

Thanks for the replys though, will have a look again tomorrow.

[InCarElectronixMark]

On most fuse holders you can take off the cable push the cable though the grommit into the engine bay and connect it back up, if you cant, cut your fuse holder off and buy a new one for under a £10 if your really struggling,

Hope you sorted it

[sam-is-cool]

dude had the smae problem? where do people bolt the earth wire down to?