Alloy Wheel Help Please

[Cozzi]

Hi,

Does anybody know if i can fit 4x108 et38 alloys onto a C2,
i have a set of these (http://www.ripspeed.com/webapp/wcs/stores/servlet/product_storeId_10002_catalogId_11802_productId_39 4035_langId_-1_CarSelectorCatalogId__CarSelectorGroupId__varien t__categoryId_111168_crumb_89243-89141-111168_parentcategoryrn_111168_topCategoryId_89243 ) and need to know it will be ok to put them on.

Any replies would be a great help. Thanks.

[R2-C2]

Mate dont bother! stick with your oem ones, what c2 you got?

[ellis]

look good mate, they will need need spacers but should fit on no probs :)

[Cozzi]

I have the 1.4 Furio MK2

I had them on my putno but they have 2 sets of bolt holes, 4x100 and 4x108 but there et38.

What spacers will i need? and thanks for your help :-D

[Cozzi]

The problem is i dont have alloys so i need some, lol.
im looking to put those on, or sell em and buy new.....

[Cozzi]

Thanks Very much both of you. :)

[WelshC2]

15mm spacer will be ok, is the bore size the same then. 65.1. If not you will need a spigot ring. I have 20mm spacers here with a larger bore diameter than 65.1 if your bore size is larger ;)

[Cozzi]

Where can i get those from do u know?? the spacers and the spigot rings, and how do i find the bore size?
thanks again for this, and sorry if i seem to be asking alot, i just dont know what i need really. :neutral:

[WelshC2]

Dont worry about where etc yet. Go out get the allot and place it on the hub of the car, if its a tight fit then your fine if it dont fit then your nackered, but if they are loose on there then get a tape measure and measure the cross-section of the hole in the back of the wheel...

After saying all that, do a search on google for the diameter of a Fiat Punto ;)

[Cozzi]

They are loose, i tried yesterday to put em on, then bolt holes match up,
but the centre hub on the car is too small and the alloys doesnt sit on it properly. :neutral:

[WelshC2]

Just checked fiat is 58.1 so they wont fit mate. c2 is 65.1 so they will not fit on the hub. Sell them on and get some new rims.

[Cozzi]

I was affraid you would say that, lol. ok well thanks for all your help.

[20alex07]

With those wheels you will need 20mm spacers. I will get you the rimstock part number and price for the spigots tomorrow with these they will fit.

[WelshC2]

they will not fit as the bore diameter is wrong .

[elniniol999]

welshy if they are multifits they will.. arent most aftermarket alloys multifits now? ie big bore then u spigot it to the correct size? thats what mine are like :D

[WelshC2]

Nope. Not if you get direct fit alloys. Which i assumed he had :s. Ive bought 2 sets alloys and they C2 fitment so direct fit no spigots.

But you may be right, so check there aint like a ring in the hole mate ..

[Cozzi]

They do have spigots, i rang round abit today and
have been told i need the spigot rings and 20mm spacers,
and 20mm longer bolts aswell.
so does anyone know the best place to but those from?

thanks for the help all.

[Cozzi]

Just for peoples future reference,

i bought 20mm spacers complete with the bolts, for £60
this took the et. from 38mm to 18mm and it fitted and is now working.

Thanks to all for the help once again.

[jnc90]

Will you take a loo at these wheels please and let me know which you think would look best on a blue C2 Furio! Thanks

http://www.rimstyle.com/pages/products/product_detail.html?category=wheel_tyre_packages;t ype=bsa_345_rush;model=1036;id=BS345TS1770410825


http://www.rimstyle.com/pages/products/product_detail.html?category=wheel_tyre_packages;t ype=bsa_363_infinity;model=1036;id=BS363HS17704108 25


http://www.rimstyle.com/pages/products/product_detail.html?category=wheel_tyre_packages;t ype=aez_xylo;model=1036;id=AEXYLHS1770410825

[Deanash]

the 3rd ones id say but its personal preferance when it comes to alloys

[giibbeh]

3rd ones there nice =D